How to manually add the Doc.It PDF Printer (Version 3 Only)
1. Control Panel\Devices and Printers
2. Added a local printer
3. Use an exsisting port: CPWPT692: (Doc.It PDF Printer)
4. For the driver I select "Lexmark C524 PS (MS)"
5 Printer Name: Doc.It PDF Printer
6. Do not share, set as default as prefered
Related Articles
Adding a Transparent Signature Stamp to the Doc.It PDF Editor
To create a transparent signature stamp: Start with a clean, blank piece of 8.5 by 11 inch paper and sign the center of the paper the same way and the same size as you would any document you sign manually. Scan the piece of paper to create a PDF. ...
Reinstalling the Doc-It 4 PDF Printer - Complete
Sometimes it is necessary to completely remove the Doc-It 4 PDF Printer and re-install. This procedure does it in a more complete way to resolve issues including multiple instances of the printer showing up. * If you will be performing this from a ...
How to Resolve PDF Editor System configuration error
Good day Doc.It Users! You may experience the following error after your system has experienced a hard shut down. An example of this would be a power outage or any type of unplanned hard shutdown due to your system being unresponsive. This error can ...
How-To Add a Work Binder to Clients in Doc.It
A work binder can be add to a single client or multiple clients at the same. This is dependent on the need and is based on the client type. The client type will dictate the type of work binder that will be used. Example, an individual tax binder can ...
Printer Missing
Try one of the following to reinstate your missing Doc.It 4 PDF Printer - (Quick) Reset the printer using the Doc.It Startup Utility found in the system tray. Right Click yellow icon in system tray > click Doc.It Startup Utility > Reset Printer - ...